GlStencilOp

From QB64 Wiki
Revision as of 15:19, 20 April 2020 by Odin (talk | contribs) (Text replacement - "{{KW|_GL}}" to "SUB _GL")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

_glStencilOp: set front and back stencil test actions


Syntax

 SUB _glStencilOp (BYVAL fail AS _UNSIGNED LONG, BYVAL zfail AS _UNSIGNED LONG, BYVAL zpass AS _UNSIGNED LONG)
 void _glStencilOp(GLenum sfail, GLenum dpfail, GLenum dppass);


sfail
Specifies the action to take when the stencil test fails. Eight symbolic constants are accepted: _GL_KEEP, _GL_ZERO, _GL_REPLACE, _GL_INCR, _GL_INCR_WRAP, _GL_DECR, _GL_DECR_WRAP, and _GL_INVERT. The initial value is _GL_KEEP.
dpfail
Specifies the stencil action when the stencil test passes, but the depth test fails. dpfail accepts the same symbolic constants as sfail. The initial value is _GL_KEEP.
dppass
Specifies the stencil action when both the stencil test and the depth test pass, or when the stencil test passes and either there is no depth buffer or depth testing is not enabled. dppass accepts the same symbolic constants as sfail. The initial value is _GL_KEEP.


Description

Stenciling, like depth-buffering, enables and disables drawing on a per-pixel basis. You draw into the stencil planes using GL drawing primitives, then render geometry and images, using the stencil planes to mask out portions of the screen. Stenciling is typically used in multipass rendering algorithms to achieve special effects, such as decals, outlining, and constructive solid geometry rendering.

The stencil test conditionally eliminates a pixel based on the outcome of a comparison between the value in the stencil buffer and a reference value. To enable and disable the test, call _glEnable and _glDisable with argument _GL_STENCIL_TEST; to control it, call _glStencilFunc or _glStencilFuncSeparate.

There can be two separate sets of sfail, dpfail, and dppass parameters; one affects back-facing polygons, and the other affects front-facing polygons as well as other non-polygon primitives. _glStencilOp sets both front and back stencil state to the same values. Use _glStencilOpSeparate to set front and back stencil state to different values.

_glStencilOp takes three arguments that indicate what happens to the stored stencil value while stenciling is enabled. If the stencil test fails, no change is made to the pixel's color or depth buffers, and sfail specifies what happens to the stencil buffer contents. The following eight actions are possible.

_GL_KEEP
Keeps the current value.
_GL_ZERO
Sets the stencil buffer value to 0.
_GL_REPLACE
Sets the stencil buffer value to ref, as specified by _glStencilFunc.
_GL_INCR
Increments the current stencil buffer value. Clamps to the maximum representable unsigned value.
_GL_INCR_WRAP
Increments the current stencil buffer value. Wraps stencil buffer value to zero when incrementing the maximum representable unsigned value.
_GL_DECR
Decrements the current stencil buffer value. Clamps to 0.
_GL_DECR_WRAP
Decrements the current stencil buffer value. Wraps stencil buffer value to the maximum representable unsigned value when decrementing a stencil buffer value of zero.
_GL_INVERT
Bitwise inverts the current stencil buffer value.

Stencil buffer values are treated as unsigned integers. When incremented and decremented, values are clamped to 0 and 2<sup>n</sup> - 1, where n is the value returned by querying _GL_STENCIL_BITS.

The other two arguments to _glStencilOp specify stencil buffer actions that depend on whether subsequent depth buffer tests succeed (dppass) or fail (dpfail) (see _glDepthFunc). The actions are specified using the same eight symbolic constants as sfail. Note that dpfail is ignored when there is no depth buffer, or when the depth buffer is not enabled. In these cases, sfail and dppass specify stencil action when the stencil test fails and passes, respectively.


Notes:

Initially the stencil test is disabled. If there is no stencil buffer, no stencil modification can occur and it is as if the stencil tests always pass, regardless of any call to _glStencilOp.

_glStencilOp is the same as calling _glStencilOpSeparate with face set to _GL_FRONT_AND_BACK.


Errors

_GL_INVALID_ENUM is generated if sfail, dpfail, or dppass is any value other than the defined constant values.


Use With:

_glGet with argument _GL_STENCIL_FAIL, _GL_STENCIL_PASS_DEPTH_PASS, _GL_STENCIL_PASS_DEPTH_FAIL, _GL_STENCIL_BACK_FAIL, _GL_STENCIL_BACK_PASS_DEPTH_PASS, _GL_STENCIL_BACK_PASS_DEPTH_FAIL, or _GL_STENCIL_BITS

_glIsEnabled with argument _GL_STENCIL_TEST


See also

SUB _GL _glBlendFunc, _glDepthFunc, _glEnable, _glLogicOp, _glStencilFunc, _glStencilFuncSeparate, _glStencilMask, _glStencilMaskSeparate, _glStencilOpSeparate


Copyright: 1991-2006 Silicon Graphics, Inc. This document is licensed under the SGI Free Software B License.
For details, see http://oss.sgi.com/projects/FreeB/.



Navigation:
Keyword Reference - Alphabetical
Keyword Reference - By Usage
Main Wiki Page

Copyright 1991-2006 Silicon Graphics, Inc. This document is licensed under the SGI Free Software B License. For details, see http://oss.sgi.com/projects/FreeB/.